Wire Guard Rail
All four sides
The rail runs the full perimeter of the top deck. Shoppers reach across a square table from every side, and without a rail the far edge loses stock onto the floor all day.
Two tiers · wire guard rail · 1000 mm square
The plainest promotional table in the range: two dark decks in a black steel frame with a wire guard rail around the top. It is built to be tiled, not admired.
Studio angles on white. The guard rail, the deck, the frame corner and the foot are photographed below.
Some promotion fixtures are meant to be looked at. This one is meant to be multiplied. It is the recorded 1000 × 1000 × 800 mm square in its simplest form — two dark decks in a black steel frame — and it exists so a store can put six of them down the middle of a floor and have them read as one system rather than as six different objects.
The wire guard rail around the top deck is the only addition, and it earns its place: it stops stock walking off the edge of a deck that shoppers reach across from all four sides. Everything else is deliberately plain, because a fixture bought in quantity should not be competing with the goods on it.
The plainest promotional table in the range: two dark decks in a black steel frame with a wire guard rail around the top. It is built to be tiled, not admired.
Supermarkets, convenience stores, chain retail and speciality stores. Tell us the store format and the floor area and the specification comes back written against them.
A plain fixture has nowhere to hide, so all four of these are structure and finish rather than features.
All four sides
The rail runs the full perimeter of the top deck. Shoppers reach across a square table from every side, and without a rail the far edge loses stock onto the floor all day.
Two per table
Two decks, both dark. It doubles the facings for the same footprint, which is the whole reason a promotion table has a lower tier at all.
Welded, coated after
Corners are welded and coated afterwards. On a fixture bought six at a time, a corner that rusts is six corners that rust, which is why this joint gets the same attention as on a display piece.
One per leg
Each leg lands on its own foot. Promotion tables get dragged rather than lifted when a floor is re-laid, and the foot is what takes that instead of the leg end.
Every item on this page is made to order. Send a floor plan, a hand sketch or a photograph of a fixture you like, and we quote against it.
Store fixtures are light for their size, so a container fills up on volume long before it fills up on weight. What decides your freight is not what one unit weighs — it is what shape the goods are in when they go through the container door. Everything we build leaves in one of three shapes.
Shelving bays, produce islands and bulk cabinets travel as panels — uprights, shelves, back panels and plinths, strapped flat with bubble wrap on every component. They are built up on the shop floor, so the packing list and the assembly drawings travel with the goods.
This model
Trolleys slide into one another and baskets stack. Past the first unit, each extra one adds only its nesting pitch instead of its full length, so the shipped volume ends up a fraction of what the unit count suggests.
A checkout lane is welded, coated and fitted out as one piece, so it is crated whole with padding on the steel. Nothing waits to be assembled at the store beyond levelling it into the lane, and the crate is the counter plus a margin.
Promotional stands flat pack as panels and shelves. Two promotion tables are on record and both are exactly 1000 × 1000 × 800 mm — KS-T-02 and KS-T-06 — which is not a coincidence: a 1000 mm square is the module that tiles into a 2000 mm run or a block of four without leaving a gap. That square is what a loading plan is worked from.
A promotion square is never the whole story — it is the punctuation between the fixtures that hold the range.
A promotion square almost always terminates a shelving run, so the two carry one colour reference.
See shelving baysLoose lines are promoted constantly, and a square at the aisle head is the cheapest way to push one.
See bulk food binsThe queue side of a lane is the highest impulse position in the store, and a promotion square is what fills it.
See checkout countersHow many of each a store needs is a floor area question rather than a product question, and it is answered store by store on the supermarket layout design page.
This is the one you buy several of. The square is 1000 × 1000 × 800 mm.
Tell us how many you need and how you want them laid out — a run, a block of four, or scattered at aisle heads. The square tiles into all three without a gap.
The four that come up on nearly every enquiry for this build. If yours is not here, send it with your layout and it is answered alongside the quotation.
1000 × 1000 × 800 mm. Both promotion tables on record are exactly this size, and that is not a coincidence — a 1000 mm square tiles into a 2000 mm run or a block of four without leaving a gap.
It is fitted rather than welded, so yes. Stores promoting bulky cased goods often take it off; stores promoting anything small keep it, because small stock on a square table finds the floor.
It doubles the facings for the same footprint, which on an aisle head is the scarcest thing you have. The only argument for a single tier is if you are promoting something too tall for two.
That is what the module is for. Six of them make a run or a block with no gaps and no odd sizes, and they all take the same colour reference so they read as one system.
