Hexagon Riser
Shaped, not flat
A hexagonal riser gives the goods a defined footprint. Staff restocking in thirty seconds between other jobs put the stock into the shape rather than onto a surface, which is why the display survives the week.
Stepped tiers · hexagon risers · 1000 mm module
A stepped stand with hexagonal risers on top. The hexagons are what stop a promotion looking like a pile — they give the goods a shape to sit in rather than a flat surface to be stacked on.
Studio angles on white. The hexagon riser, the step, the cubby and the timber are photographed below.
Give a store a flat promotional table and by the second day it holds a pile. Hexagonal risers change that: they give the goods a defined shape to sit in and a height to sit at, so the display holds its form even when staff are restocking in a hurry between other jobs.
Below the risers the stand steps down through tiers into cubby storage, so the selling volume is underneath and the shaped display stays on top. It is built from the recorded 1000 × 1000 × 800 mm square in dark timber, which reads heavier than the pale builds and suits a promotion meant to look permanent.
A stepped stand with hexagonal risers on top. The hexagons are what stop a promotion looking like a pile — they give the goods a shape to sit in rather than a flat surface to be stacked on.
Supermarkets, convenience stores, chain retail and speciality stores. Tell us the store format and the floor area and the specification comes back written against them.
The risers are the reason this costs more than a flat table, so two of these four are the risers and the step below them.
Shaped, not flat
A hexagonal riser gives the goods a defined footprint. Staff restocking in thirty seconds between other jobs put the stock into the shape rather than onto a surface, which is why the display survives the week.
Descends to the cubbies
The tiers step down toward the shopper, so the whole stand is read from standing height rather than looked down on. It also puts the taking height at the bottom where the volume is.
Selling volume
The cubbies at the base hold the volume. A stepped stand with no storage underneath is a display that has to be refilled from a trolley in the aisle.
Board over steel
Dark board over the steel frame. It reads heavier than the pale builds in this category, which suits a promotion that is meant to look like part of the store rather than a temporary stack.
Every item on this page is made to order. Send a floor plan, a hand sketch or a photograph of a fixture you like, and we quote against it.
Store fixtures are light for their size, so a container fills up on volume long before it fills up on weight. What decides your freight is not what one unit weighs — it is what shape the goods are in when they go through the container door. Everything we build leaves in one of three shapes.
Shelving bays, produce islands and bulk cabinets travel as panels — uprights, shelves, back panels and plinths, strapped flat with bubble wrap on every component. They are built up on the shop floor, so the packing list and the assembly drawings travel with the goods.
This model
Trolleys slide into one another and baskets stack. Past the first unit, each extra one adds only its nesting pitch instead of its full length, so the shipped volume ends up a fraction of what the unit count suggests.
A checkout lane is welded, coated and fitted out as one piece, so it is crated whole with padding on the steel. Nothing waits to be assembled at the store beyond levelling it into the lane, and the crate is the counter plus a margin.
Promotional stands flat pack as panels and shelves. Two promotion tables are on record and both are exactly 1000 × 1000 × 800 mm — KS-T-02 and KS-T-06 — which is not a coincidence: a 1000 mm square is the module that tiles into a 2000 mm run or a block of four without leaving a gap. That square is what a loading plan is worked from.
A promotion square is never the whole story — it is the punctuation between the fixtures that hold the range.
A promotion square almost always terminates a shelving run, so the two carry one colour reference.
See shelving baysLoose lines are promoted constantly, and a square at the aisle head is the cheapest way to push one.
See bulk food binsThe queue side of a lane is the highest impulse position in the store, and a promotion square is what fills it.
See checkout countersHow many of each a store needs is a floor area question rather than a product question, and it is answered store by store on the store layout planning page.
Tell us what goes on the risers. Their size and height are set to it.
Tell us what you promote most often and roughly what it is packaged in. The riser size and height are set against the actual goods rather than to a standard.
The four that come up on nearly every enquiry for this build. If yours is not here, send it with your layout and it is answered alongside the quotation.
They sit on the top tier rather than being built into it, so they can be moved or taken off entirely. Most stores leave them in place because the shape is what keeps the display looking made.
A hexagon reads as a designed object where a square reads as a box. It also packs against its neighbours in more than one orientation, which gives staff more ways to lay the display out without it looking wrong.
It is built from the recorded 1000 × 1000 × 800 mm square. Both promotion tables on file are exactly that size, and larger stands are that module tiled.
Yes, and it changes the fixture considerably. Dark reads as permanent and pale reads as temporary — which one you want depends on whether the promotion position is a fixed part of your layout or a seasonal one.
